The Royal
The cushion rails of the Royal table are made up of 3-ply body consisting of three layers of woods of alternating grain glued together to insure the rails against climatic changes. The center layer of these plies is hard maple, the most suitable wood of holding cushion bolts firmly in place. The top of the rails are covered with a rail cap of compound construction faced with solid Rosewood. The rails are securely fastened to the table with invisible cushion bolts. These bolts are covered with blind cushions rail facing built up of 5-ply compound construction faced with a selected grade of figured Mahogany veneer.
The Royal table can be equipped with any style Monarch perfect angle cushion.
Semi-Jumbo type. Sides made of 5-ply construction faced with a selected grade of figured Mahogany veneer handsomely inlaid. Top moldings, which supplies the chief bearing surface for the slate, is made of compound built up construction with a dimension of 4 x 3 3/8 in. Legs are fashioned of 5-ply lumber, solidly glued together and reinforced with glue blocks at each corner. Sides are doweled and bolted into legs to assure perfect unit rigidity. Further unit strength obtained by cross stretchers which also furnish additional bearing for slate surface. Workmanship of this table is of the very best. Wood used in the construction of the Royal is exquisitely figured Mahogany, inlaid with Satinwood and vari-colored marquetry lines.
Consists of three pieces of the vest quality slate of regulation 1 in. thickness, with all joints rigidly secured by brass dowels and sockets. Playing surface is entirely free from screw holes. If desired, slate bed of 1½ in. thickness can be furnished.
The pocket irons are No. 6 style, countersunk in the ends of the cushion rails by means of brass sockets

