The Regina

The Regina table is made in what is known as our high grade semi-Jumbo type of construction. The sides of the table are made of five-ply construction and are faced with a selected grade of figured mahogany veneer. The top molding, which furnishes the chief bearing surface for the slate, is made of compound built-up construction and is 4 x 3 3/8" in dimension. The legs are made of 5-ply lumber, solidly glued together and reinforced with glue blocks in all corners. Sides are doweled and bolted into the legs to assure perfect rigidity of table. Table further strengthened by cross stretchers which also furnish additional bearing surface for slate. Workmanship of the whole table is the very best. The Regina table represents the finest table of the semi-Jumbo type obtainable.

The cushion rails of the Regina table are made up with what is known as a 3-ply body consisting of three layers of woods of alternating grain glued together to insure the rails against climatic changes. The center piece of these plies is hard maple, the most suitable wood to hold the cushion bolts firmly. The top of the rail is covered with a rail cap of compound construction faced with solid rosewood. The rails are securely fastened to the table by invisible cushion bolts. These bolts are covered by blind cushion rail facing which is built up of 5-ply compound construction and faced with a selected grade of figured Mahogany veneer.

The slate bed consists of three pieces of the best quality slate, regulation size 1 inch thick, with all joints secured by brass dowels and sockets. It has no screw holes on the playing surface, if desired, 1½ inch slate can be furnished.

The playing equipment furnished with the Regina is as ordered.